Showing posts with label lighting controls. Show all posts
Showing posts with label lighting controls. Show all posts

Friday, August 3, 2012

Wattstopper Digital Dimming Room Controller



LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and threewire fluorescent ballasts. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control.
Key Features
  • Versatile 20A controllers with line voltage relay(s) and triac-based forward phase control dimming
  • Compatible with most load types; three selectable dimming curves for each load
  • Plug to other components using Cat 5e cables with RJ45 connectors eliminating wiring errors
  • Plug n’ Go automatic configuration for quick startup
  • Store load preset level and 16 scene preset levels for each load
  • Facilitate energy saving dimming control strategies including automatic daylight harvesting

WS Link

Tuesday, June 12, 2012

New Fixture from Sistemalux - The Sliver



SLIVER LED
 Link to the Product Detail

The SLIVER by Sistemalux is a small and monimalist LED interior wall linear luminaire (less than 1" deep by 5/8" wide).
The SLIVER is made of extruded and machined aluminum with white LEDs and a polycarbonate diffuser that insures an even illumination; individual diodes disappear, leaving only a clean line of light.
Available in various lenghts (up to 8'), the SLIVER uses only 5.85W per linear foot of white LED in warm (3000K) or neutral (4000K) white.

Thursday, June 7, 2012

The Sliver from Sistemalux Lighting

Here is a new fixture from Sistemalux.

Call if you have any questions.

Shad Asebrook
SAsebrook@SescoLighting.com
615-830-1655

Sistemalux Flash news
The SLIVER by Sistemalux
New combined Sistemalux Exterior Catalog
Sliver
Model
SLIVER
The Sliver
The SLIVER by Sistemalux is a small and minimalist LED interior wall linear luminaire (less than 1" deep, 5/8" wide).
The SLIVER is made of extruded and machined aluminum with white LEDs and a polycarbonate diffuser that insures an even illumination; individual diodes disappear, leaving only a clean line of light.
Available in various lengths (up to 8'), the SLIVER uses only 5.85W per linear foot.
Lamping options: warm white LED 3000K or neutral white 4000K
Finishes:
White
Gray
Uses a remote power supply. See specification sheet for power supply options.
For further information on this fixture or any other one,
please click HERE
or contact us at information@sistemalux.com
Click HERE to locate your nearest Sistemalux Sales Representative.

Thursday, April 5, 2012

ASLA at the Yazoo Brewery, Nashville

Attention Nashville Landscape Architects:
Event Site Link

Landscape Architecture Month
Celebration and Fundraiser

April 25th at the Yazoo Brewery Taproom. 6 - 8pm

Sponsored by the Middle Tennessee Section
of the TN American Society of Landscape Architects
Where:
Yazoo Brewery Taproom
910 Division Street
Nashville, TN 37203

Driving Directions

When:
Wednesday April 25, 2012 
6:00 PM to 8:00 PM CDT
Add to my calendar
 
2012 TNASLA Sponsors 






 


You're Invited

COME CELEBRATE WITH TNASLA 
 
AND HELP RAISE MONEY FOR TWO GOOD CAUSES



HELP OUR EFFORTS
Bid on great items in the silent auction with proceeds benefiting ASLA and Y-Build of Nashville


CHAT AND DRINK
First Yazoo pint provided by ASLA
 Fruit and cheese spread too! 












You don't have to register to attend, but it would be great if you did!


Call or email with any questions
 
Rebecca Ratz
TNASLA
615-636-5124

Wednesday, February 29, 2012

"Space Age" MRI LED Technology from Peachtree Lighting

hID=505http://www.peachtreelighting.com/pdf_display.cfm?ID=505

On-Board LED driver.  A remote driver is not necessary.  This is a great way to introduce a very long lasting MRI light fixture with a typical installation with which contractors are familiar.  The fixture is available in a LED MRI retrofit as well.  Thanks.


Tuesday, January 31, 2012

Fox Theatre, Featured Installation

Color Kinetics sent the following to me as a featured installation.  This is the Fox Theatre in St. Louis. 

Add caption


The Fox Theatre was a movie palace built in 1929 by movie pioneer William Fox as a showcase for the films of the Fox Film Corporation. The theatre, also known as "The Fabulous Fox," was one of five Fox theatres whose other locations included Brooklyn, Atlanta, Detroit and San Francisco. Today the theatre has a full calendar of live entertainment from rock concerts to comedy shows to Broadway musicals.

The theatre was originally designed by architect C. Howard Crane, who used a unique blend of Asian decorative motifs to create a magnificently ornate interior which featured a 5,280-pound chandelier and gilded velvet throne chairs. Fox's wife, Eve Leo, also added to the eclectic decor by displaying furnishings, paintings, and sculptures that she found on her travels overseas. The Fox Theatre enjoyed a few prosperous years but then fell into decline and closed its doors in 1978. However, the theatre was bought in 1981, underwent a $3 million restoration, and opened for business again in 1982.

During the summer of 2011, the theatre was renovated again. The $2 million restoration's sustainability initiatives included installing an updated HVAC system and replacing the theatre's incandescent cove lighting with an LED lighting system. Fox Theatre worked with Lighting Representatives, Inc. to find an LED replacement which would allow them to retain existing light levels and quality of light and which would work seamlessly with their current dimming system. Lighting Representatives recommended Philips Color Kinetics eW Cove QLX Powercore in 2700 K. The LED lighting solution was easily installed into the steel coves, replacing 2,200 incandescent lamps. The LED lighting solution is expected to reduce the theatre's energy consumption by 85 percent, and also significantly reduce lighting maintenance costs.


Thursday, December 29, 2011

Lighting Case Study, Mayo Clinic

When the Mayo Clinic broke ground on the $441 million Gonda Building, design manager Stan Larson said every purchase was carefully reviewed to ensure it would deliver long-term value.  “With the pressure of construction costs, we needed to deliver good quality within budget,” he said. Because Larson had successfully used a variety of Williams Downlighting products in past Mayo remodeling projects, he knew the company could meet the high standards required in a new world-class medical complex. “With some of our key lighting applications, we chose Williams Downlighting because they consistently deliver high performance at a competitive price.”

While Williams Downlighting was widely used in conference rooms, offices and hallways, a critical application was illuminating employee cafeteria and break room areas. As part of the open foyer design, the project called for colored-glass downlights in these locations that would be visible from the building’s main atrium. Though Williams Downlighting offered four standard colored-glass options for its recessed fluorescent fixtures, the company successfully delivered a broader palette of custom colors required by the Gonda project.  “This application had some really precise needs,” said Rob Chasse of JTH Lighting in Eagan, MN, who partnered with Larson on the project. “Williams Downlighting collaborated with its glass suppliers to make sure the final product was what the architect and lighting designers wanted.”

Mayo’s attention to detail has paid handsome dividends. The 20-story Gonda Building has received several architectural awards – including honors from the International Interior Design Association for excellence in interior lighting.  “The workmanship on the Williams Downlighting fixtures always seems to be higher than some of the other manufacturers that just stamp them out,” Larson said. “When I first saw their factory, I was impressed with their design ideas, manufacturing processes, and work ethic. Time and time again, that shows in the results we get in working with them.”

http://hewilliams.com/case%20study/53057.pdf




Job Specific Information:
■ 150 PH75-LD recessed fluorescent fixtures with colored luminous glass options were installed in employee cafeteria and break room areas in the Mayo Clinic’s new 20-story Gonda Building
■ Additional Lighting Used: 200 A60 recessed incandescent luminaires, 130 PV60 recessed vertical fluorescent downlights
■ Architect: Ellerbe Becket, Minneapolis, MN
■ Lighting Representative: JTH Lighting, Eagan, MN
■ For complete PH75 specifications, see hewilliams.com

Friday, December 16, 2011

HE Williams Lighting, New Pendants for Open Office Lighting



Williams introduces the AB suspended architectural series featuring three baffle profiles, 2, 3, or 4-lamp T5 or T8 cross-sections, plus side perforation and divider options for added visual interest and glare control. The versatile AB Series' rectangular or curved blade design will complement a variety of architectural applications. 



Features:
  • Baffles add visual interest while reducing glare.
  • Side lamping delivers direct/indirect illumination.
  • Optional perforated side panels add contrast and subtle glow.
  • Divider option on three-lamp cross-section provides glare control.
  • Continuous row mounting available with self-aligning joining method to ensure straight rows.
  • This fixture is proudly made in the USA.
Specifications:
  • Housing – 22-gauge die-formed C.R.S. with 20-gauge die-formed C.R.S. end plates.
  • Baffle – 22-gauge steel/aluminum construction, 2” O.C.
  • Finish – Textured matte white polyester TGIC powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.
  • Electrical – Electronic ballast standard, instant start T8, program start T5, rated Class P.
  • Mounting – Suspended. 1/16” dia. x 24” adjustable steel aircraft cable and mounting hardware for grid ceiling applications provided (standard). Surface mount available with alternate mounting accessories.
Labels – UL/CUL listed as fluorescent luminaire suitable for dry or damp locations.

Wednesday, November 16, 2011

DEPARTMENT OF ENERGY ADOPTS ASHRAE 90.1-2010

DEPARTMENT OF ENERGY ADOPTS ASHRAE 90.1-2010 AS THE NATIONAL REFERENCE STANDARD ON OCTOBER 19, 2011

States have until October, 2013 to update their commercial building energy codes to meet or exceed the requirements of ASHRAE 90.1-2010. This revision requires much more extensive use of lighting controls than previous versions and is anticipated to realize 18.2% more energy savings than 90.1-2007.

Click on the links below for more detailed information regarding these changes.

Sales 411 – ASHRAE 90.1-2010 vs 2007 

Brochure -
 Download the NEW CodeSmart Brochure
Click on the link for detailed information on the code status and implementation in your state.
http://bcap-ocean.org/code-status-commercial